Safety - Meister MET36ME Traduction Du Manuel D'utilisation Original

MW-5459600-Bedien-1807_(98) 18.07.18 09:44 Seite 53
WARNING!
This indicates a dangerous situation
which, if not prevented, may result
in death or serious injury.
NOTE!
This warns of potential material
damage.
This symbol indicates
useful additional
information for use.
Declaration of conformity
(see chapter "Declaration
of Conformity"): Products
labelled with this symbol
meet all the applicable
Community Directives of
the European Economic
Community.
The symbol "GS" stands
for tested safety Products
ID 1419059505
that are labelled with this
symbol conform to the
requirements of the
German Product Safety
Law (ProdSG).
Read the operating
instructions.
The tacker and charger
are only intended for
interior use.
Products that are marked
with this symbol conform
to Safety Class II.
Micro-USB Charging
MIKRO Socket
USB
3 – Safety
Intended Use
The tacker is intended only for
private use, for hobby and DIY
applications for the following
purposes:
• for stapling fabrics, leather,
cardboard, foils and similar
materials onto a soft surface
(e.g. pine wood).
All other applications are expressly
excluded and are not valid
applications of intended use.
The manufacturer or dealer
assumes no liability for injuries,
losses or damage caused by
improper or incorrect use. Possible
examples of improper or incorrect
use are:
• Use of the tacker for purposes
other than those for which it is
intended;
• Failure to observe the safety
instructions and warnings and
the installation, operating,
maintenance and cleaning
instructions contained in this
manual;
• Failure to comply with any
regulations specific to the use of
the tacker and / or generally
53