Product Overview; Intended Use - for_q FQ-AHE 4020 BASIC Mode D'emploi

Product overview

1 Oil tank cover
2 Chain tensioning wheel
3 Front handle
4
Lower tube
5
Harness connector
6 Release switch
7 Main handle
8 Insertion slot
9 Saw chain
10 Guide bar
11 Sprocket cover knob
12 Sprocket cover
13 Motor housing
14 Length adjustment coupling
15 On/Off switch
Attach harness
1
Attach the harness to the har-
ness connector 5 of the ma-
chine and adjust the harness to
your height.
EN
170

Intended use

This garden tool is
– intended to take care of trees and
bushes in the private sector;
– not intended to cut trees;
– not suitable for sawing plastic, ma-
sonry or building materials which
are not made of wood;
– to use according to the descriptions
and safety instructions indicated in
this operating manual.
Any other use is not as intended. Im-
proper use is not covered by the war-
ranty and the manufacturer will reject
any liability. The user is liable for all
injuries to third parties and damage
to their property.
Insert Battery
2
Press the charged battery into
the insertion slot 8 until it clicks
into place.
To remove, press the release
button (1.) and pull out the bat-
tery (2.).