Dometic TEC 30D EV Manuel D'utilisation, D'entretien Et D'installation page 23

3 -Fasten brackets (C) (supplied on demand) to the wall, next to the holes that were pre-
viously found.
4 -Install equipment onto brackets (C) and fasten it with special damping elements (D).
Dampening device
Bracket (C)
Installation with resting equipment (type B)
Proceed as indicated.
1 -Prepare an opening having the
requested features inside the ve-
hicle.
2 -Find the exact position with drill-
ing template (B), on the pack
and perform the fastening and
drain holes.
3 -Insert gasket (G) into drain hole.
(D)
(B)
Drilling template
- 23 - Use, maintenance and installation instructions
TEC 30D EV
(G)
Gasket
40200801600.tif
GB