Dometic TEC 30D EV Manuel D'utilisation, D'entretien Et D'installation page 14

RULES FOR MOVEMENT AND INSTALLATION
– Lift and move the unit as described by the manufacturer and indicated on the packaging,
GB
on the unit itself and in the user manual.
– The staff loading, unloading and moving the unit, must have experience and abilities gai-
end and recognised in the sector in question, and must be familiar with the lifting equip-
ment to be used.
– Loading and transport must be carried out using means of adequate capacity, anchoring
the unit at the points foreseen by the manufacturer. Those authorised to carry out these
operations must have specific experience and abilities, so as to safeguard themselves
and any other persons involved.
– All phases of installation must be considered, from the time the general plan was drawn
up. Before starting these phases, as well as defining the installation area, the person au-
thorised to carry out these operations must, if necessary, implement a "safety plan" to
safeguard the persons directly involved from harm, and must scrupulously follow all laws,
with particular reference to those regarding mobile work sites.
– For equipment installation, choose an area with a slope of no more than 25°, with a sup-
port plane that is stable and has a load coefficient that is adequate to support the weight.
– During equipment installation, keep the area free of flammable substances (gas, paint,
etc.) and ensure that the hot parts never come into contact with easily flammable mate-
rials.
– It is necessary to ensure that the installation area has been provided with all the suction,
power supply and drainage connections required.
– During installation, respect the perimeter areas indicated by the manufacturer, also bear-
ing in mind all the other operations in the surrounding areas. This requirement must be
implemented in such a way as to comply with current laws on safety at work.
– Installation and connection must be carried out according to the manufacturer's instruc-
tions. The person in charge must also take into account all legal requirements and rules,
and must carry out all installation and connection operations in a workmanlike manner.
When installation has been completed, before use, he must carry out a general check to
ensure these requirements have been met.
RULES FOR OPERATION AND USE
– As well as being suitably trained and informed regarding use of the unit, the operator must
have the abilities and knowledge required for the type of work to be carried out.
Do not allow the equipment to be used by people who are not adequately capable and
competent.
- 14 - Use, maintenance and installation instructions
TEC 30D EV