Ferm FZT-250/1500 Mode D'emploi page 5

TABLE SAW
Always read the instruction for
electrical products carefully before
use. It will help you understand your
product more easily and avoid
unnecessary risks. Keep this
instruction manual in a safe place for
future use.
Contents
1. Technical specifications
2. Safety instructions
3. Assembly instructions
4. Operation
5. Maintenance
1. TECHNICAL
SPECIFICATIONS
Voltage
Frequency
Power input
No load speed
Saw blade dimensions
Number of teeths
Measurements of bench
Dust extraction outlet
Weight
Lpa (sound pressure level)
Lwa (sound power level)
Product information
Fig. A
1. Protective cap
2. Fence
3. Bench inlay
4. Mitre handle
5. Height handle
6. Measurement set-up for fence
7. On/off switch
8. Thermic safety switch
9. Height adjustment handle for stand
10. Handgrip
11. Brake
12. Rubber foot
13. Nut for rubber foot
14. Nuts and bolts for support foot
15. Support foot
16. Stand
Ferm
230-240 V~
50 Hz
1500 W
4500/min
254x16x2.8mm
Z40
667x430 mm
30(20) mm
37 kg
99.3 dB(A)
112.3 dB(A)
Check first whether or not the delivery has been
damaged by transport and/or whether all the
parts are present.
2. SAFETY INSTRUCTIONS
Explanation of symbols
In this manual and/or on the machine the
following symbols are used:
Read instructions carefully.
In accordance with essential
applicable safety standards of
European directives.
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the
mains electricity in the case that the
cord gets damaged and during
maitenance.
Keep bystanders away.
Wear a dust mask. Working with
wood, metals or other materials may
produce dust that is harmful to health.
Do not work with materials containing
asbestos!
Wear ear and eye protection.
Faulty and/or discarded electrical or
electronic apparatus have to be
collected at the appropriate recycling
locations.
GB
5