Worx Sonicrafter WX675 Notice Originale page 6

TECHNICAL DATA
wX675 wX675.1 (6 - designation of machinery, representative of high
Type
frequency oscillation tool)
Voltage
Power input
Oscillation speed
Oscillation angle
Protection class
Machine weight
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
6
K &K
pA wA
Wear ear protection when sound pressure is over
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
wARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on
the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
Oscillating Tool
Vibration emission value a
Uncertainty K = 1.5m/s²
220-240V~50/60Hz
250W
11000-20000/min
3.2°
/ll
1.5kg
L : 86dB(A)
pA
L : 97dB(A)
wA
3.0dB(A)
80dB(A)
= 5.76m/s
2
h
EN