Care And Cleaning - SOLIS CITRUS PRESS PRO 845 Mode D'emploi

56

Care and cleaning

• Always ensure that the Solis Citrus Press Pro is
switched OFF at the On/Off button and the plug is
removed from the power outlet before cleaning,
disassembling, assembling and storing the appliance.
• Follow these instructions to clean all surfaces or parts
that come into contact with food during juicing:
1. For easy cleaning – immediately after each use
rinse removable parts under warm water to remove
wet pulp. Allow parts to air dry before reassembling.
2. For thorough cleaning – after disassembling the
appliance, all removable parts should be washed in
hot soapy water or on the top shelf of the dishwasher.
The Motor Base and Juicing Press Arm should be
wiped with a soft, damp cloth. All parts should be
dried thoroughly before reassembling.
• Store the cleaned and reassembled Solis Citrus
Press Pro in an upright position in a cool, dry place.
Do not place any items on top of the Solis Citrus
Press Pro whilst stored.
Cleaning
NOTE: NOTE:
Rinse or wash all removable parts immediately after Do not soak the Stainless Steel Filters or other
use. Dried citrus pulp is difficult to remove and may removable parts in bleach.
stain. If any staining does occur, wipe the affected
part/s with undiluted dishwashing liquid, rinse and Never immerse the motor base in water or any
dry thoroughly. other liquid.
• Do not use harsh abrasives.
57