Stihl 0088 489 01 Série Notice D'emploi page 10

GB
Dear Customer!
Congratulations, you have purchased high quality safety shoes / occupational footwear.
The article was subjected to a type approval test by a recognised European inspection
authority (adress page 2) and fulfils all the fundamental requirements of European
Regulation No 2016/425 and Regulation No 2016/425 on Personal Protective Equipment
as brought into UK law and amended European Regulation 2016/425 on Personal
Protective Equipment (Northern Ireland).
General information: The safety shoes naturally comply with the requirements of the
EN ISO 20345:2011 and satisfy not only the base requirements (SB) but also conform
depending on the item to one of the corresponding additional requirements (Category
S1, S2, S3) Therefore, you have chosen a safety shoe with top safety and wearing
features.
The professional shows naturally comply with the requirements of the EN ISO
20347:2012 and satisfy not only the basic requirements (OB) but also conform
depending on the item to one of the corresponding additional requirements (category
O1, O2, O3). Therefore, you have chosen occupational footwear with top safety and
wearing features.
Before using the shoes it should be ensured that the fit is correct. The closing systems
present on the shoes should be used properly.
Care Tips: Leather is something special. It has many features. It is natural, resists
deformation, stretches, is breathable, adapts to the shape of the foot, and has a high
capacity for moisture absorption/release. To maintain this high material quality, caring of
the shoe is very important.
• After using the shoes, they should be cleansed of course impurities.
• Normal shoe polish is only suitable for our leather shoes to a certain extent. For shoes
that often become wet, we recommend care products that have a waterproofing effect
without restricting water vapor permeability or absorption. We offer this care product
as an accessory.
• For shoes with textile material, spots are best removed with a clean cloth, pH-neutral
soap and warm water. Dirt should
never be removed with a brush. This can cause damage to the material.
• Wet shoes should be placed in a ventilated area after work to dry gradually. The
shoes should never be dried rapidly using a heat source, as the leather will become
hard and brittle. A proven method is to stuff the shoes with paper.
• If possible, it is advisable to use two pairs of shoes alternately, as this gives shoes
adequate time to dry.
For other care hints, please ask us, or the retailer from which you bought these safety
shoes.
Important Note: These shoes' lining materials are of high quality, partly coloured
materials or leather, which are chosen with the greatest care. Lining materials can
10