Télécharger Imprimer la page

Krüger & Matz KM0541 Mode D'emploi page 11

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
Remote control
6
5
4
3
2
1
1.
Mute button
2.
Volume decrease button
3.
Next equalizer setting
4.
Manual change frequency buttons
5.
Previous track in BT and USB mode / previous radio channel in FM mode
6.
Power button
7.
Mode button
8.
Play / pause in BT and USB mode / Automatically search and save radio
station in FM mode
9.
Next track in BT and USB mode / next radio channel in FM mode
10. Equalizer button
20
Owner's manual
7
8
9
10
11
12
Owner's manual
Installation
1.
Connect speakers with speaker cable. Make sure, that connection is correct
on both speakers.
2.
Connect speakers with external device.
3.
Connect speakers with power supply with power cord.
4.
Set the volume knob to the minimum value.
5.
Turn on speakers with power switch on the rear panel.
6.
Press mode button to set desired mode. It will be shown on the display.
BT settings
1.
Make sure the device is turned on.
2.
Chose BT mode with mode button.
3.
Keep the external device in close proximity to the speaker while pairing.
4.
On the external device, search for Bluetooth devices and connect to the
speaker KM Sonic.
5.
After proper pairing, the appropriate message will be emitted from the
speaker.
Note:
Each time you turn on the speaker, it will automatically connect to the last
paired device. Note that it must be turned on and have Bluetooth turned on.
FM radio
1.
Turn on device.
2.
Chose FM mode with mode button.
3.
Use manual frequency change buttons to set frequency.
4.
To automatically search for the nearest available FM station, press and hold
the manual frequency change button.
5.
To save FM station press and hold next radio channel button.
6.
To automatically search and save nearest available FM station press
automatically search and save radio station button. Pressing and holding
this button deletes the currently displayed saved station.
Wired connection (AUX, coaxial, optical input)
1.
Turn on device.
2.
Use proper cable to connect speakers with external device.
3.
Use mode button to chose desired mode.
4.
Use external device to control the music.
21

Publicité

loading