Pioneer XW-HTP550 Mode D'emploi page 11

Controls and Displays
1 CHANNEL INDICATORS
Light to indicate the selected channel.
2 CHANNEL
In case of poor reception due to interference
from other electrical devices, you can improve
reception by selecting another channel. Each
time you press the button, the channel
changes sequentially:
CH 1 CH 2
Each of the 4 channels is allocated a
frequency as follows:
• CHANNEL 1 - 2.412 GHz
• CHANNEL 2 - 2.432 GHz
• CHANNEL 3 - 2.452 GHz
• CHANNEL 4 - 2.472 GHz
• Poor reception may cause the audio to be
interrupted or stopped. This is not
malfunction. Try changing the location or
orientation of the transmitter and/or the
wireless speaker to improve reception.
3 Antenna
Transmits signals to the wireless speaker.
CH 3 CH 4
4 TUNED indicator
Lights when the signal from the transmitter is
properly received.
5 POWER indicator
Lights when the wireless speaker is switched
on.
6 POWER
Press to switch the wireless speaker on or off.
• The wireless speaker volume can be
adjusted using the controls of the SX-315
Audio Multi-Channel Receiver. Please
refer to the section Setting individual
channel levels in the SX-315 manual.
• The wireless speaker has an internal
antenna.
02
11
En