The "ON/OFF" button (shown in Fig. C as number 3) will start to flash.
Now hold down the "Hammam/Turkish bath" button for at least 5 seconds (shown in Fig. D as number 4)
until it starts flashing.
The button will flash for a few minutes.
During this phase the generator is recognising all the additional features installed.
fig.D
When the recognition phase is complete, the "Hammam/Turkish bath" button (shown in Fig. D as number 4)
will stop flashing, but remain lit and the "ON/OFF" button will start flashing again.
Press the "ON/OFF" button as shown in Fig. E: the panel will exit from the technical menu. Press the "ON/
OFF" button again to complete the start-up sequence, after which your generator will be ready to use.
fig. E
The data and features referred to are not binding on EFFEGIBI and the company reserves the right to make any appropriate changes without having to give prior warning or replace this manual.