Publicité
Les langues disponibles
Les langues disponibles
EXTEND LOAD ARMS.
On the inner hubs,
pull and turn the
red triggers.
UNLISTED VEHICLES:
LOAD ARMS
CAUTIONS:
• Adjust load arms to just above horizontal.
• Make sure bikes have sufficient clearance
from the ground.
LOAD HEAVIEST BIKE FIRST
Always load first bike with
chain away from vehicle.
Always use the cradles
closest to the vehicle.
Instruction #1035818D - 7/27
Rotate load
arms to
just above
horizontal.
A Yakima TubeTop (see cover
page) may be required to carry
your bike safely.
Failure to load bikes
properly can result in
property damage, personal
injury, or death.
Bikes should be as level as possible
to avoid ground clearance issues
and possible ejections.
REPLACE RED TRIGGERS.
• Make sure that both triggers
are seated in the hub!
• Move both arms up and down,
they must snap into place!
If the arms do not snap into
place, adjust triggers and move
arms until the arms are in place.
Stabilize the bike
frame in the cradle.
The straps can be routed
under the cables.
• Arrange bikes for best
stabilization.
• Pull straps tightly over bike
frame, and hook onto cradle
Publicité
