Work Area Environment; Overload; Bodily Injuries; Power Cord - Dustcontrol DC 2900 Traduction Des Instructions De Service D'origine

Masquer les pouces Voir aussi pour DC 2900:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Work area environment

Do not expose the machine to moisture. Do not use it in damp or wet areas or close to flammable liquids or gases.
CAUTION
This machine must only be used and stored in a dry environment.
CAUTION
Do not rinse the machine with water.

Overload

Never let the machine work fully throttled, as this poses a risk of overheating.

Bodily injuries

CAUTION
Never try to change electrical connections yourself. An error can be fatal!
Never allow the extraction point to make contact with any part of the body. The strong negative pressure can damage blood ves-
sels in the skin.
WARNING
When installing, handling, and transporting the machine, protective gloves must be worn to prevent personal
injury from sharp edges.

Power cord

Never pull the machine by the power cord. Keep the power cord away from heat and sharp objects. Regularly inspect the power
cord.
If using an extension cord, it must be waterproof.
The machine must not be used if the power cords or contacts are damaged.
If the power cord is damaged, it must be replaced by Dustcontrol or a Dustcontrol authorized service center.

Important safety precaution

The machine must only be used if all filters are intact and fitted properly.

Care and maintenance

Keep the machine clean and free from dust deposits. Ensure that the suction hose and all seals are intact and undamaged. Keep
the carrying handles dry and free from oil and grease.

Inspection

Regularly check the device for damage and wear. Any damage must be rectified by a Dustcontrol authorized service center.
8

Publicité

Table des Matières
loading

Table des Matières