Setting - CPED INITIAL Notice Originale

At its fi rst start-up, the device displays after a few seconds the message SERV, fi rst step of the set-
ting, which uses 5 keys:
Key Name
çM
Left / Menu
ê
Down
é
Up
è
Right
OK
Enter
The following steps are necessary and suffi cient to set the softener.
You just need to know the hardness of the raw water (concentration in lime scale), measured before
or known from the public water distribution network.
First push 3 seconds on the key M, until the message LANG appears on the display.
Message
Step n°
displayed
LANG
_ :_
1
FR
_ :_
HOUR
00:00
2
MIN
15:00
Notice technique ADOUCISSEUR A27-A6X - Manual SOFTENER A27-A6X code P0011144 - Rev 0 - 29/02/2016

SETTING

• Activates the menu with a long push (5 seconds)
• Ongoing setting cancellation without record
• Down move within a list of choices
• Decrease / change of a parameter
• Up move within a list of choices
• Increase / change of a parameter
• Move from left to right digits (example: hours to minutes)
• Enter into a menu
• Setting validation
• A long push (5 seconds) triggers a manual regeneration. During
this process, a brief push forces the trigger of the next step.
Purpose
Change language if necessary
Language selection
Time setting : hours
Time setting: minutes
Function
How to do
Default value is French
OK
to change
çM
to cancel
êé
to select
OK
to confi rm
çM
to cancel
êé
to change
è
to go to minutes
OK
to confi rm
çM
to cancel
êé
to change
è
to go back to hours
OK
to confi rm
çM
to cancel
27