Unpacking And Setting Up The Machine - Vama CASA Mode D'emploi

3. UNPACKING AND SETTING UP THE MACHINE

1. Remove the machine from the box and place it on a flat and clean work surface.
DE
Please make sure that there is enough free space above the machine to open the cham-
ber lid. The distance to all side walls must be at least 10 cm.
EN
2. Check that all parts included in the scope of delivery are complete.
FR
3. Remove all protective foils from the machine before commissioning.
IT
4. Check carefully if the machine is damaged. If the machine is damaged, inform the manu-
ES
facturer immediately and return the machine.
5. Clean the machine before the first use. Please refer to Section 7.1 "CLEANING" on
page 53.
6. Plug the power supply unit into the machine and then plug the power plug into the power
outlet.
42 | English