Baumer CombiPress PFMH/N Manuel De Mise En Service page 9

6.3 Mounting DFON display
ATTENTION
Damage of the front cover or ring
Do not use tools to tighten the front cover or screwing ring.
f „
Remove the front cover.
f
„
Remove the O-ring from the sealing groove.
f
„
Connect the internal UnitCom ribbon cable to the DFON in accordance with the pin assignment.
f
„
Tighten the screwing ring by hand.
f
„
6.4 Connecting FlexProgrammer
Connection to DFON display
1
Connection to PFMH/N transmitter
www.baumer.com
2
2
1
Operating Instructions
Pressure measurement
CombiPress™ PFMH/N
Fully welded pressure transmitter with touch screen
1 Com 1
2 Com 2
Open the housing by unscrewing the front cover.
f
„
Connect the red clip to Com 1.
f
„
Connect the black clip to Com 2.
f „
1 Com 1
2 Com 2
Open the housing by unscrewing the front cover.
f „
Connect the red clip to Com 1.
f „
Connect the black clip to Com 2.
f „
9 / 48