Mounting - Baumer CombiPress PFMH/N Manuel De Mise En Service

5.

Mounting

5.1 Mounting conditions
ATTENTION
Mechanical damage of the diaphragm
Do not touch the diaphragm.
f „
Always cover the sensor with the protection cap after usage.
f „
5.2 PFMN mounting
DANGER
Risk of injury from hazardous medium
Wear protective equipment for hazardous media (e.g. acids, alkaline solutions).
f „
Empty vessel and pipe before mounting.
f „
www.baumer.com
Pressure measurement
CombiPress™ PFMH/N
Fully welded pressure transmitter with touch screen
The sensor can be mounted on any point on the
vessel or pipe.
9 Vessel and pipe are free of media
For mounting an NPT connection, seal thread
f
„
with Teflon tape (PTFE).
Screw in sensor.
f
„
Tightening torque:
G 1/2 A hygienic: max. 20 Nm
„ „
G 1 A hygienic: max. 20 Nm
„ „
G 1/2 A DIN 3852-E: max. 30 Nm
„ „
1/2-14 NPT: max. 20 Nm
„ „
Operating Instructions 5 / 48