Normal Mode; Battery Mode - Eaton Powerware 5125 Guide D'installation

Normal Mode

During Normal mode, the
displays the percentage of UPS load capacity being used by the
protected equipment (see Figure 23). The UPS monitors and charges the
batteries as needed and provides power protection to your equipment.
When all of the load level indicators and the
power requirements exceed UPS capacity; refer to "Troubleshooting" in
the Powerware 5125 Rack-Mount UPS (5000/6000 VA) User's Guide for
more information.

Battery Mode

When the UPS is operating during a power outage, the alarm beeps
intermittently, the
the utility power returns, the UPS transfers to Normal mode operation
while the battery recharges.
If battery capacity becomes low while in Battery mode, the
starts flashing and the alarm becomes continuous. Immediately
complete and save your work to prevent data loss and similar difficulties.
When utility power is restored after the UPS shuts down, the UPS
automatically restarts. The
recharged to an acceptable level.
®
EATON Powerware 5125 (9910-P65) UPS Installation Guide for IBM
μ
indicator illuminates and the front panel
>100%
76–100%
51–75%
26–50%
0–25%
Figure 23. Load Level Indicators
indicator illuminates, and the
indicator flashes until the battery has
® S
Applications
OPERATION
indicator are illuminated,
μ
flashes. When
indicator
27
164201638 Rev A