Purchasing Accessories; Dustbag Airflow Indicator - Miele HS14 Mode D'emploi

en
We recommend using only genuine
Miele accessories bearing the "ORI-
GINAL Miele" logo on the packaging.
Only these will guarantee the optimum
performance of your vacuum cleaner
and the best possible cleaning results.
Dustbags with the "ORIGINAL Miele"
logo on the packaging are not made
from paper or paper-based materials
and nor do they have a cardboard col-
lar. This is why Miele dustbags are
particularly long-lasting and reliable.
Please note that faults and damage
caused by use of accessories which
do not bear the "ORIGINAL Miele"
logo on the packaging are not covered
by the vacuum cleaner warranty.

Purchasing accessories

Original Miele accessories are available
from the Miele webshop, the Miele Cus-
tomer Service Department and from
your Miele dealer.
Original Miele accessories are identified
by the "ORIGINAL Miele" logo on the
packaging.
With 3D4U, Miele also offers free ac-
cessories to download for your 3D
printer (www.miele.com, Service,
3D4U).
44
Every packet of original Miele dustbags
contains 4 dustbags, one AirClean ex-
haust filter and one motor protection fil-
ter. Original Miele multipacks contain 16
dustbags, 4 AirClean exhaust filters and
4 motor protection filters (available de-
pending on country).
Original Miele exhaust filters can also
be purchased separately from the Miele
Customer Service Department or your
Miele dealer. Please quote the model
number of your vacuum cleaner when
ordering to make sure you get the cor-
rect filter. You can also order these fil-
ters via the Miele webshop.
Dustbag airflow indicator (Fig. 27)
Change the dustbag when the airflow
indicator turns red, or sooner if it is no
longer effective (see possible reasons
for this below).
Blocked pores reduce the suction
power of the vacuum cleaner.
Dispose of the dustbag when it is full.
Do not attempt to re-use the dustbag.
To check the airflow indicator
 Attach the standard adjustable floor-
head to the vacuum cleaner.
 Switch the vacuum cleaner on and
select the highest power setting.
 Lift the floorhead off the floor a little.