English - Master MH 10-SE Traduction De La Notice Originale

OBJ_DOKU-14586-002.fm Page 10 Tuesday, January 26, 2010 1:26 PM
Technical Data
Demolition Hammer
Art. No.
Rated power input
Impact rate min
Impact energy per stroke
Chisel positions
Chiselling capacity in
concrete of medium
hardness kg/h
Tool holder
Lubrication
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given apply for nominal voltages [U] of
230/240 V.
Noise/Vibration Information
Measured sound values determined according to
2000/14/EC.
Typically the A-weighted noise levels of the product
are: Sound pressure level 89 dB(A); sound power
level 100 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60745:
Chiselling: Vibration emission value a
2
Uncertainty K=1.5 m/s .
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is
used for different applications, with different acces-
sories or poorly maintained, the vibration emission
may differ. This may significantly increase the expo-
sure level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the
exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as: main-
tain the tool and the accessories, keep the hands
warm, organisation of work patterns.
10–English
We declare under our sole responsibility that the
MH 10-SE
product described under "Technical Data" is in con-
0702 571 X
formity with the following standards or standardiza-
W 1500
tion documents: EN 60745 according to the
-1
900–1890
provisions
J 6–25
2006/42/EC, 2000/14/EC.
12 2000/14/EC: Guaranteed sound power level
105 dB(A).
according to Annex VI.
490
Technical file at:
SDS-max
Adolf Würth GmbH & Co.KG, PFW,
Central D-74650 Künzelsau
permanent
Künzelsau, 29.01.2008
lubrication
Adolf Würth GmbH & Co. KG
kg 10.1
/II
N. Heckmann
❏ Before any work on the machine itself,
❏ Operate your machine only with the auxil-
The auxiliary handle 7 can be set to any position for
a secure and low-fatigue working posture.
Loosen the knurled nut 8, rotate the auxiliary handle
2
=16 m/s ,
h 7 around the axis of the machine to the required
position and tighten the knurled nut 8 again.
The auxiliary handle 7 can be mounted to a different
position. For this, completely unscrew the knurled
nut 8 and then pull out the hexagon bolt upward.
Pull off the auxiliary handle 7 to the side and turn
around the remaining clamping element by 180°.
Mount the auxiliary handle 7 in reverse order.
Declaration of Conformity
of the directives
Conformity assessment
A. Kräutle
Auxiliary Handle (see figure A)
pull the mains plug.
iary handle 7.
2004/108/EC,
procedure
26.1.10