Balluff BTL7-A/C/E/G Série Notice D'utilisation page 60

BTL7-A/C/E/G_ _ _-M_ _ _ _-A/B/Y/Z(8)-S32/S115/S135/S140/KA_ _/FA_ _
Magnetostrictive Linear Position Sensor – Rod Style
12
Accessories (continued)
12.6 Plug-in system, 8-pin
The BTL is available with an 8-pin pigtail plug-in system.
The plug-in system has two parts:
– The M12 contact insert is preassembled to the BTL's
cable
– The square flange for assembly using the contact insert
is included in the scope of delivery.
Fig. 12-11: Plug-in system based on the example installing the BTL in
a hydraulic cylinder
Series ZA10
Square flange material: Nickel-plated brass
BTL7-...-KA00,2-ZA10, PUR cable 0,2 m
BTL7-...-KA00,3-ZA10, PUR cable 0,3 m
Series ZA15
Square flange material: Stainless steel 1.4404
BTL7-...-KA00,2-ZA15, PUR cable 0,2 m
BTL7-...-KA00,3-ZA15, PUR cable 0,3 m
+0.10
Ø 13.3
-0.00
Ø 3.2
14
20
Fig. 12-12: Square flange
28
Square flange
M12 contact insert
20
5
3
english