Panasonic LUMIX H-H020A Mode D'emploi page 7

∫Attaching the Lens
Align the lens
fitting marks A on
the camera body
and the lens and
then rotate the lens
in the direction of
the arrow until it
clicks.
• Do not press the lens release button B when
you attach a lens.
• Do not try to attach the lens when holding it at an
angle to the camera body as the lens mount may
get scratched.
• Check that the lens is attached correctly.
• Be sure to remove the lens cap when recording.
∫ Detaching the Lens
While pressing on
the lens release
button B, rotate the
lens toward the
arrow until it stops
and then remove.
• Attach the lens rear
cap so that the lens contact point does not get
scratched.
• Attach the body cap to the camera so no dirt or
dust will get inside the main unit.
7
VQT5B49