Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cleaning of the stainless steel parts: Clean the parts with soapy water and then dry them with a soft cloth. The shininess is
maintained by periodically cleaning with the special products normally available on the market. Never use abrasive powders.
Cleaning of the burner flame dividers: as they are not fixed, the flame dividers can be cleaned by simply removing them and cleaning
with soapy water. After drying them well and checking that the holes are not blocked, put them back into their correct position.
6
Publicité
Table des Matières
