Publicité
Les langues disponibles
Les langues disponibles
Congratulations on purchasing the
lisa Table Flash Lamp . We hope it
will provide you with many years of
service. You have chosen a modern
and reliable system.
Please read the operating instruc-
tions through carefully to be able to
start the unit correctly and to fami-
liarise yourself with all of the
systems features.
Standard components
Please check if all following compo-
nents are included:
- lisa table flash lamp
- 230 V power supply unit
- Operating instructions
- Warranty card
If any parts are missing please
immediately contact your dealer or
the manufacturer directly.
Functional principle
An alerting system requires at least
one transmitter and a receiver. The
transmitter captures sound signals
and transforms them into digital sig-
nals that are passed to a receiver by
the existing mains electricity supply.
The receiver then transforms these
digital signals into light signals.
Channel selection
A digital transmission system ensu-
res the correct recognition of each
of the digital signals from each
transmitter. The system has 10 diffe-
rent selectable channels, 0-9. The
factory setting for all lisa devices is
channel 0. Only where more than
one installation is required in the
same building will it be necessary to
select a different channel for each
system.
To select a channel, turn the rotary
switch on the backside of the trans-
mitter to the required channel num-
ber using a small screwdriver.
All transmitters and receivers must
be set to the same channel.
Example:
Set channel number 0
English 9
Publicité
