Storch 61 20 50 Mode D'emploi page 11

Accessories:
Mains water adapter
When connected to the normal water line, you obtain a limited (low water pressure) but always a good cleaning effect.
Screw the adapter onto the screw thread (1) instead of the high-pressure hose. Now you can connect your standard
water hose to the unit.
HD hose adapter M 21
Many high-pressure hoses have an M21 thread. The adapter is screwed onto the screw thread (1) before the connection
of the high-pressure hose.
Spare parts:
19 52 05 Nozzle distributor strip (without nozzles)
19 52 09 Sealing lips
19 52 13 Nozzle
19 52 15 Ball valve
Warranty
Warranty conditions:
A warranty period of twelve months from the date of purchase/date of invoice applies to our tools for commercial
customers. If we have granted an extended warranty period, this period will be noted separately in the operating manu-
al for the equipment in question.
Claims:
If you wish to claim under our warranty or guarantee, please return the complete device and your invoice to our logisti-
cs centre in Berka, postage paid, or send it to one of our authorised service centres.
Please contact the chargeable STORCH service hotline first: +49 (0)202 . 49 20 – 110.
Your rights under our warranty or guarantee:
Claims can only be accepted for material defects or manufacturing errors, and only assuming intended use of the appli-
ance. Wear parts are not covered by such claims. All claims shall become void in the event of installation of third party
components, improper handling and storage, as well as in the event of obvious disregard of the operating instructions.
Repairs:
All repairs have to be conducted on our premises or by an authorised STORCH service centre.
(2)
(1)
(3)
11