Fermax SKYLINE 97573C Manuel D'installation Et De Programmation page 9

DIGITAL VDS - BUS2 - DUOX
DIGITAL VDS - BUS2 - DUOX
EN
PROGRAMMING GUIDE
Programming
To set up the system it is necessary to enter the programming mode. To
enter programming mode dial '0' + 'AB21AB' and the programming code.
This device has two access levels (with its own different codes and privileges):
- User level (code 19025): allows add and modify operations with the
user list;
- Administrator level (code 24797): allows any operation in the system
(parameters and user list).
19025
AB21AB
24797
User level
Administrator level
Pag 9