Maintenance Schedule; Maintenance - Husqvarna 340iBT Manuel D'utilisation

2. Push the power lever to the Cruise control position
to set the selected airflow.
Introduction
WARNING:
do any maintenance work you must read
and understand the safety chapter.

Maintenance schedule

Maintenance

Clean the external surfaces of the product with a clean and dry cloth. Do not
use water.
Keep the handles dry and clean. Remove oil or grease.
Make sure that the power lever operates correctly and is not damaged.
Make sure that the power trigger operates correctly.
Make sure that nuts and screws are tight.
Make sure that the release buttons on the battery operates correctly and locks
the battery into position.
Make sure that all couplings, connections and cables are not damaged. Re-
move dirt.
Make sure that the battery connectors are not damaged.
12
3. Continue to operate with the selected airflow
without the power trigger pushed.
4. To increase the airflow, push the power trigger.
When the power trigger is released, the airflow
goes back to the airflow that was set in step 2.
5. Release the power trigger and push the power
lever to the start position to stop the Cruise control
function.
Maintenance
Before you
Daily Weekly Monthly
X
X
X
X
X
X
X
1166 - 007 - 30.06.2020
X