Ryobi RBG6G1 Traduction Des Instructions Originales page 6

worn.
KNOW YOUR PRODUCT
See page 141.
1. Transparent screen x 2
2. Spark arrestor x 2
3. Wheel guard x 2
4. Grinding wheel x 2
5. Work rest x 2
6.
7. Mounting hole x 4
8. Work rest lock knob x 2
MAINTENANCE
Do not modify the product in any way or use accessories
not approved by the manufacturer. Your safety and that
of others may be compromised.
Do not use the product if any switches, guards or
other functions does not work as intended. Return to
an authorised service centre for professional repair or
running.
Always make sure the power plug has been
removed from the mains power source before
maintenance on the product.
Before and after each use, check the product for
damage or broken parts. Keep the product in top
working condition by immediately replacing parts with
spares approved by the manufacturer.
Clean out accumulated dust using a brush or vacuum
cleaner. Do not use compressed air.
To assure safety and reliability, all repairs, including
changing brushes, should be performed by an
authorised service centre.
If the power cord is damaged, it must be replaced by
an authorised service centre in order to avoid a safety
hazard.
WARNING
For greater safety and reliability, all repairs should be
performed by an Authorised RYOBI Service Centre.
TRANSPORTATION AND STORAGE
When storing the product, disconnect the power cord.
Clean the product using a brush and vacuum cleaner.
Always carry and lift the product according to the
instruction in this user manual.
Protect the product from any heavy impact or strong
vibrations which may occur during transportation in
vehicles.
4
Secure the product to prevent it from slipping or falling
over.
Store the product and its accessories in a dry, safe
place which is not accessible to children.
We recommend using the original package for storage
to protect the product against dust.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
of as waste. The machine, accessories
and packaging
environmental-friendly recycling.
SYMBOLS ON THE PRODUCT
Safety alert
Please read the instructions carefully before
starting the product.
CE conformity
EurAsian conformity mark
Ukrainian mark of conformity
Wear ear protection.
Wear eye protection.
Not for wet grinding or cutting
Do not use chipped, cracked or defective
grinding wheel.
Wear safety gloves.
English
should be sorted for