8. Care and maintenance
Danger!
Always pull out the mains power plug before starting any cleaning
work.
•
Always keep the tool clean and dry and protect it from oil and gre-
ase.
•
Wear safety goggles to protect your eyes during cleaning.
•
Always keep the tool and the air vents clean in order to ensure
safe and correct use.
•
Check the ventilation grilles at the motor and at the On/Off switch
for dust and foreign bodies. Remove layers of dust with a soft
brush.
•
If required, use a soft damp rag to wipe the tool housing clean.
You can use a mild cleaning agent but no alcohol, petrol or other
cleaning agent.
•
Never use aggressive cleaning agents to clean plastic parts.
•
Lubricate all moving parts regularly.
•
Check all fasteners regularly. Vibrations might cause fasteners to
GB
become loose in the course of time.
9. Faults
If the equipment does not work:
Check that the power cable is connected properly and check the
electricity fuses/circuit breakers. If the equipment will not work in
spite of the supply voltage being OK, please send it to the customer
service address provided.
Anl_PE_EHH_9048_SPK7.indb 204
Anl_PE_EHH_9048_SPK7.indb 204
- 204 -
21.01.16 15:17
21.01.16 15:17