Before Starting The Equipment - Pattfield Ergo Tools PE-EHH 9048 Traduction De La Notice Originale

5. Before starting the equipment

Before you connect the equipment to the mains supply make sure
that the data on the rating plate are identical to the mains data.
Warning!
Always pull the power plug before making adjustments to the
equipment.
The plug on the power tool must fi t into the socket. The socket
must not be modifi ed in any way. Do not use adapter plugs with
power tools that have a grounded plug.
Unmodifi ed plugs and matching sockets will reduce the risk of elec-
tric shock.
Avoid body contact with grounded surfaces such as pipes,
heating systems, stoves and refrigerators. There is an increased
risk of electric shock if your body is grounded.
If you use an electric power tool outdoors, use only extension
cables that are suitable for outdoor use. The use of an extension
cable which is suitable for outdoor use reduces the risk of electric
shock.
If you cannot avoid using the power tool in a damp location,
use a residual current device (RCD) circuit breaker.
The use of a residual current device (RCD) circuit breaker will reduce
the risk of electric shock.
We recommend that you connect the hedge trimmer only to an elec-
tricity source protected by a residual current device (RCD) breaker
with a maximum trip current of 30 mA.
Fitting the steady grip (Fig. 3a – 3c)
Remove the fastening screw (Fig. 3a/Item A) from the steady grip and
swing open the fastening clip (Fig. 3b/Item B). Mount the steady grip
on the motor unit (Fig. 3b/Item 11) as shown in Fig. 3b. Then rotate
Anl_PE_EHH_9048_SPK7.indb 199 Anl_PE_EHH_9048_SPK7.indb 199
- 199 -
GB
21.01.16 15:17 21.01.16 15:17