Pattfield Ergo Tools PE-EHH 9048 Traduction De La Notice Originale page 202

cess several times, so that you are sure that your equipment func-
tions properly.
Please watch out for the cutters as they slow
down to a standstill.
•
Please check that the cutters work properly. The twin-bladed cut-
ters rotate in opposite directions, thus guaranteeing high cutting
performance and smooth operation.
•
Before use, fasten the extension cable in the stress-relief clip (see
Fig. 7).
•
When working outdoors, use extension cables that are approved
for that purpose.
•
Ensure that you have a good footing. Firmly hold the hedge trim-
mer with both hands at a safe distance from your body. Before
switching the hedge trimmer on, make sure that it is not touching
anything.
Working with the hedge trimmer
•
An electric hedge trimmer can be used to cut shrubs and bushes
GB
as well as hedges.
•
The twin-bladed cutters rotate in opposite directions, thus enab-
ling cutting in both directions (see Figure 8).
•
It is recommended to tie a guide line of string along the hedge so
that you cut the hedge to a level height. Cut off all branches which
protrude beyond the guide line (see Figure 9).
•
Cut the sides of the hedge using a sweeping motion from the bot-
tom up (see Figure 10).
•
Be sure to comply with noise protection regulations and local ordi-
nances. Use of the hedge trimmer may be restricted or prohibited
on certain days (e.g. Sundays and holidays), at certain times of
the day (midday, nighttime) or in particular areas (e.g. health re-
sorts, clinics, etc.).
•
When you are cutting, ensure that you do not come into contact
Anl_PE_EHH_9048_SPK7.indb 202 Anl_PE_EHH_9048_SPK7.indb 202
- 202 -
21.01.16 15:17 21.01.16 15:17