Technical Data; Before Starting The Equipment; Cutting Grass - Pattfield Ergo Tools PE-AGS 3,6 Li Mode D'emploi D'origine

Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Speed n : ............................................... 950 rpm
0
Cutting width of the grass cutter: .............. 70 mm
Cutting width of the shrub shears ........... 100 mm
Cutting thickness of the shrub shears ........ 8 mm
Running time max.: ...................................60 min
Battery pack: ............... Li-Ion / 3.6 V d. c. / 1.3 Ah
Charging time: ............................................. 3-5 h
Protection class: ................................................III
L sound pressure level: ......................... 72.7 dB
pA
L sound power level: ............................ 92.9 dB
WA
Vibration a grass shears: ...................≤ 2.5 m/s
hV
Vibration a shrub shears: .................. ≤ 5.5 m/s
hV
Weight: .......................................................1.4 kg
Battery charger
Mains voltage................................. 230 V ~ 50 Hz
Output
Rated voltage ............................................ 6 V DC
Rated current: .......................................... 300 mA
Sound and vibration were measured in ac-
cordance with EN ISO 3744.
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
Anl_PE_AGS_3_6_Li_SPK7.indb 78 Anl_PE_AGS_3_6_Li_SPK7.indb 78
GB
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.

5. Before starting the equipment

5.1 Charging the battery pack (Figure 1/3)
•
Connect the charger to the charging station
(Figure 3).
•
Check that your mains voltage is the same
as that marked on the rating plate of the bat-
tery charger. Plug the battery charger in a
socket-outlet. The green LED (Figure 3 / Item
1) comes on to indicate that charging voltage
is available.
•
The battery pack is being charged. An empty
battery pack requires a maximum charging
period of 3 to 5 hours. The temperature of the
2
battery pack may rise slightly during the char-
2
ging operation. This is normal.
•
As soon as battery pack is fully charged, the
red LED (Fig. 3/Item 1) extinguishes
If the rechargeable battery fails to charge, check
whether there is voltage at the socket outlet.
Timely recharging of the battery pack will help
it serve you well for a long time. Recharging is
always necessary when you notice a drop in the
tool's performance.
Never allow the battery pack to become fully di-
scharged. This will cause it to develop a defect.
6. Operation
The area to be cut must fi rst be cleared of stones
and other solid objects. The safety lock-off (Fig. 1/
Item 3) prevents the tool being started unintenti-
onally. Activate the safety lock-off (Figure 1 / Item
3) by pushing it forward and pressing the ON/
OFF switch (Figure 1 Item 4) at the same time. To
switch off the tool, let go of the ON/OFF switch
(Figure 1 / Item 4).

6.1 Cutting grass

Allow the grass cutter to glide above the ground.
The best results are achieved when the lawn is
dry.
When you notice a drop in cutting performance,
- 78 -
16.10.14 10:57 16.10.14 10:57