Interior View Of Da 3I - Trotec DA 3i MultiQube Guide D'utilisation

The unit is not controlling the suction current:
• Check to ensure that the unit is switched on.
• Check to ensure that the control lamp is on.
• Check the valves to see if they are blocked. In order
to do so dismantle the air intake and outlet hoses
and look through the adapter .
07. InteRIoR vIeW oF the DA 3I
The figure below shows the schematic configuration
of the installation with:
1 . Control valve
2 . Inlet and outlet
3 . Mains adapter
4 . Control unit
5 . Relay
6 . Mains connection
7 . ON/OFF switch with LED
8 . Housing
EN
Article number . . . . . . . . . . . . . . . . . 6 .100 .000 .030
Connection voltage . . . . . . . . . . . . . . . . . . . 1~230 V
Dimensions . . . . . . . . 435 mm x 435 mm x 255 mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7,2 kg
Air transport connections . 2 x 3 adapters with 38 mm Ø
Operating manual – DA 3i Flow Rate Control Unit
08. teChnICAl SPeCIFICAtIonS
B - 5