DeWalt D25404 Traduction De La Notice D'instructions Originale page 24

EN GLI SH
HEAVY-DUTY ROTARY HAMMERDRILL
D25404, D25405
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.
Technical Data
Voltage V
(U.K. & Ireland only) V
Types
Power input W
No-load speed min
Load speed min
Impact energy J
Maximum drilling range in
steel/wood/concrete mm
Chisel positions
Core drilling capacity
in soft brick mm
Tool holder
Collar diameter mm
Weight kg
L (sound pressure) dB(A)
PA
K (sound pressure uncertainty) dB(A)
PA
L (sound power) dB(A)
WA
K (sound power uncertainty) dB(A)
WA
Vibration total values (triax vector sum) determined according to
EN 60745:
Vibration emission value a
h
Drilling into metal
a = m/s²
h,D
Uncertainty K = m/s²
Vibration emission value a
h
Drilling into concrete
a = m/s²
h,HD
Uncertainty K = m/s²
Vibration emission value a
h
Chiselling
a = m/s²
h,Cheq
Uncertainty K = m/s²
22
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
D25404 D25405
230 230
230/115 230/115
2/3 2/3
900 900
-1
0 - 730 0 - 730
-1 0 - 620 0 - 620
0–4.8 0–4.8
16/40/32 16/40/32
24 24
90 90
SDS Plus ® SDS Plus ®
58 58
4.9 4.9
Fuses:
Europe
85 85
U.K. & Ireland
3.0 3.0
U.K. & Ireland
96 96
3.0 3.0 Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
< 2.5 < 2.5
1.5 1.5
14.5 14.5
1.5 1.5
12.0 12.0
1.5 1.5
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
115 V tools 16 Amperes, mains
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.