Barbecue Grill - SEVERIN PG2468 Mode D'emploi

GB

Barbecue grill

Dear Customer,
Before using the appliance, please read the
following instructions carefully and keep this
manual for future reference. The appliance
must only be used by persons familiar with
these instructions.
General information
The barbecue grills are available in
different confi gurations.
Check which of the diagrams (I - III)
corresponds to your grill before fi tting any
accessories.
Depending on the model, the grill may be
provided with a wind shield, and the grill
rack with a separate handle
Grill models with additional base stand:
Assemble the base stand according to the
schematic diagram IV. Depending on the
model, a warming rack may be included
with your grill.
Then place the grill onto the stand. The small
feet under the grill connect with the tops of the
vertical legs of the base stand.
Ensure that the grill and base stand are placed
in a safe and stable position.
The power cord should be routed in such a
way that no one is likely to trip over it.
Important safety instructions
∙ This appliance is designed
for outdoor use only; it
must not be operated
within enclosed spaces.
∙ The equipment should
10
only be connected to an
earthed socket installed
in accordance with the
regulations. It must be
operated with an additional
earth-leakage circuit-breaker
with a rated tripping current
not exceeding 30mA.
∙ Make sure that the supply
voltage corresponds with the
voltage marked on the rating
label.
∙ The power cord should be
regularly examined for any
signs of damage. In the
event of such damage being
found, the appliance must
no longer be used.
∙ Before cleaning the grill,
ensure it is disconnected
from the power supply and
has completely cooled
down.
∙ To avoid the risk of electric
shock, the heating element
and the power cord must
not be immersed in liquid or