Bosch GKS 18V-68 GC Professional Notice Originale page 15

Number of speed settings
6
A) ±25 %
You can use the button for speed preselection (36) to preselect the required speed, even during operation.
Status indications
GKS 18V-68 GC
Battery charge indicator Meaning/cause
(user interface) (34)
Green (2 to 5 bars) Battery charged
Yellow (1 bar) Battery almost empty
Red (1 bar) Battery empty
Temperature indicator (40) Meaning/cause
Yellow Critical temperature has been reached (mo-
tor, electronics, battery)
Red Power tool is overheated and will switch off
Smartphone indicator(38) Meaning/cause
and Power tool status indic-
ator (39)
Yellow Service reminder
Power tool status indic- Meaning/cause
ator (39)
Green Status OK
Yellow Critical temperature has been reached or bat-
tery is almost empty
Red Power tool is overheated or battery is empty
Flashing red Restart protection is triggered
Connectivity functions
GKS 18V-68 GC
In conjunction with the Bluetooth® Low Energy Module
GCY 42, the following connectivity functions are available
for the power tool:
– Registration and personalisation
– Status check, output of warning messages
– General information and settings
– Management
– Setting the speed levels
The smartphone indicator (38) lights up if the power tool
sends information (e.g. a temperature warning) to a mobile
device via Bluetooth® wireless technology.
Bosch Power Tools
Basic speed setting at level
1 2 3
-1 -1
[min ] [min ] [min
2500 3000 3500
Read the corresponding operating instructions for informa-
tion about the Bluetooth® Low Energy Module GCY 42.
GKS 18V-68 C
In conjunction with the Bluetooth® Low Energy Mod-
ule GCY 42, the following connectivity functions are avail-
able for the power tool:
– Registration and personalisation
– Status check, output of warning messages
– General information
– Management
Read the corresponding operating instructions for informa-
tion about the Bluetooth® Low Energy Module GCY 42.
4 5
-1 -1 -1
] [min ] [min ]
4000 4500
Solution
–
Replace or charge battery soon
Replace or charge battery
Solution
Run the power tool at no load and allow it to
cool down
Leave the power tool to cool down
Solution
For more information see Bosch Toolbox App
or Service
Solution
–
Run the power tool at no load and allow it to
cool down, or replace or charge the battery
soon
Allow the power tool to cool down, or replace
or charge the battery
Turn the power tool off and on again; if neces-
sary, remove the battery and reinsert it.
1 609 92A 5MD | (19.03.2020)
English | 15
6
-1
[min ]
5000