Additional Information; Troubleshooting - Pioneer XW-BTS1-K Mode D'emploi

Troubleshooting

WARNING
• Never remove the casing of this apparatus.
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is
something wrong with this component, check the points below. Sometimes the trouble may
lie in another component. Inspect the other components and electrical appliances being
used. If the trouble cannot be rectified even after checking the points below, ask your nearest
Pioneer authorized service center or your dealer to carry out repair work.
• If the unit does not operate normally due to external effects such as static electricity,
disconnect the power plug from the outlet and insert it again to return to normal operating
conditions.
Problem
The power does not turn on.
Power automatically switches
to standby without user action.
No sound is output when a
mode is selected.

Additional Information

Remedy
• Disconnect the power plug from the outlet, and
insert again.
• When no device is connected to the selected the
AUX IN jack and this unit is not operated for 20
minutes or more after AUX mode is selected, power
will automatically turn OFF. (Only when APS mode
(page11) is ON.)
• Make sure the component is connected correctly.
17