EMAK Oleo-Mac PW 300 HC Manuel D'utilisation Et D'entretien page 18

GB
1 GENERAL INFORMATION
Congratulations for choosing one of our products. We would like to remind you that we took the safety
of the operator, the efficiency of its use and the protection of the environment into great consideration
when designing and manufacturing this product.
In order to preserve its features over time, please read and follow these instructions carefully.
Particular attention must be awarded to the parts with the following symbol:
as they contain important instructions regarding safety when using the water cleaner.
The Manufacturer is not liable for damage caused by:
• failure to comply with these instructions;
• use of the water cleaner not included in the "Intended Use" section;
• failure to comply with current safety regulations and regulations for the prevention of accidents in the
workplace;
• incorrect installation;
• failure to carry out the prescribed maintenance;
• modifications or actions without the authorisation by the Manufacturer;
• use of non-original or unsuitable spare parts for this model of water cleaner;
• repairs which were not carried out by a Skilled Technician.
1.1 Address of the Manufacturer
The address of the manufacturer is given in the declaration of conformity at the end of this part of the
instruction manual.
1.2 Use And Conservation of these Operating and Maintenance Manual
The operating and maintenance instructions are an integral part of the water cleaner and they must be
kept in a safe place for future reference so that they may be readily consulted in case of need.
The operating and maintenance instructions contain important information for the safety of the operator
and of any people near him and for the protection of the environment.
In case of deterioration or loss, a new copy should be requested from the dealer or from an authorised
service centre.
If the water cleaner is passed on to a third party, please make sure these operating and maintenance
instructions are also given to the new owner.
We take great care when drawing up our instructions. If you note any mistakes, please do inform the
Manufacturer or an authorised service centre.
The Manufacturer reserves the right to modify, update and correct these instructions without notice.
It is illegal to copy these instructions, even partially, without prior authorisation by the Manufacturer.
1.3 Symbols and Terms
1.3.1 Symbols
The symbol:
next to certain parts of the text, is to indicate that there is the firm possibility of injury to persons if the
relative instructions and indications are not followed.
The symbol:
next to certain parts of the text is to indicate that there is the possibility of damaging the water cleaner if
the relative instructions are not followed.
1.3.2 Terms
18
• Skilled Technician: a person, generally from the service centre, who has received appropriate training and
WARNING
WARNING
CAUTION
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Read and keep in mind that indicated in the
INSTRUCTION MANUAL - SAFETY WARNINGS.
WARNING