Electrical Connection - ROBLIN Open 610 Mode D'emploi

ELECTRICAL CONNECTION

- Connect the appliance cord to a 10/16 A standard grounded power outlet (2 pins +
earthing pin), preferably located above the hood.
- If the power outlet is not permanently accessible, a 3-pole switch will have to be
provided in the installation with a minimum contact opening of 3 mm.
- The installation shall comply with standard NF C 15.100.
TECHNICAL DATA
Power supply voltage
Total connection power
Motor
Lighting
Number of speeds
Evacuation duct diameter
Hood width
Hood depth
Hood height
This hood complies with EEC directives 76.889 and 82.499 related to
radioelectric disturbances (ordinance dated August 19th 1985 published in
Official journal date September 1st 1985)
10
230 V - 50 Hz
350 W
2 x 135 W
2 x 40 W
3
100 or 120 mm
598 mm
270/360 mm
350 mm