Bticino L4561N Instructions D'utilisation page 31

2 INSTALLATION
WARNINGS
Before programming the Stereo Control, make sure that the remote control batteries of
c
your Hi-Fi are sufficiently charged
Check the position of the Hi-Fi system LED and place the cable with the IR transmitter at a
c
maximum distance of 1 cm from it.
Make sure there is only one Hi-Fi LED (it is not possible to manage several source-LEDs).
c
When using the Stereo Control, do not use the remote control of the Hi-fi system.
c
The pickup capacity of the Stereo Control is between 30 Khz and 80 Khz; operation outside
c
this range is not guaranteed.
Given the continuous technical and functional developments (infrared remote controls) of
Hi-Fi systems, the manufacturer recommends to check the compatibility of the device. To do
so, please contact the Call Centre or your nearest Technical Service Centre.
31
UK