Installation - RAIS/attika Q-BE INSERT Manuel D'utilisateur

attika
English RAIS/ - User Manual Q-BE INSERT

Installation

It is important that the stove is installed properly in order to preserve both the environment and
safety.
When installing the stove, please make sure that all local rules and regulations, including those
referring to
the national and European standards are observed. Local authorities and a chimney specialist
should be contacted prior to installation.
The stove may only be installed by a qualified/competent RAIS dealer/installer, otherwise, the
warranty will be voided.
It is prohibited to carry out unauthorised alterations to the stove.
NOTE!
The local chimney sweep should be notified of the stove installation before its first usage.
There must be plenty of fresh air in the room where the stove is being installed, in order to en-
sure proper combustion. Note that any mechanical exhaust ventilation e.g. an extraction hood
may reduce the air supply. Any air vents must be placed in such a manner, that the air supply is
not blocked.
Alternatively, the stove can be supplied with fresh air directly from the outside through a flexible
piping fitted to the damper.
The stove consumes 10 to 20 m ³ of air per hour.
The floor structure must be able to carry the weight of the stove and the chimney. If
the existing floor construction doesn't meet this requirement, suitable
measures (e.g. load distributing plate) shall be taken to achieve it. Consult a building expert.
The stove should be placed on non-combustible material.
The stove should be set up at a safe distance from inflammable materials.
Please, make sure that objects made of combustible materials (such as furniture) are not placed
closer than the distances indicated in the following sections concerning installation (fire risk).
If the stove is installed on a flammable floor, the dimensions of the non-combustible surface
under the stove shall comply with national/local regulations.
10