afx light DMX512-PRO Manuel D'utilisation page 4

6. SCENE Button with LED
With the button pressed (LED lights) the number buttons allow to activate and
deactivate illumination scenes.
7. CHASE Button with LED
With the button pressed (LED lights) the number buttons allow to activate and
deactivate chases.
8. Data wheel PAN
Controls the pan movement of moving heads or scanners and programs functions.
9. Data wheel TILT
Controls the tilt movement of moving heads or scanners and programs functions.
10. USB Port
Connect a USB storage device for storing and importing data and firmware updates.
11. Button REC/ENTER with LED
• Long press: To activate or deactivate the programming mode.
• Short press: For storing individual illumination scenes or chases and for confirming
adjustments.
12. Button MENU/ESC with LED
• Long press: To call and exit the system settings.
• Short press: To abort a setting procedure and jump back to a higher menu level.
13. Button BLACK OUT/DEL with LED
• Sets all control channels to the value zero (e.g. for turning off the devices).
• For deleting illumination scenes or chases.
• For inserting a scene into a chase.
14. Button RUN MODE/SWAP with LEDs
• For setting the running mode of a chase. A short press switches between manual,
sound-controlled and automatic mode. The LEDs next to the button indicate the
current setting.
- MANUAL: The chase can be manually advanced step by step with the pan wheel.
- MUSIC: The individual steps of the chase run to the rhythm of the music picked up
via the internal microphone.
- AUTO: The individual steps of the chase run at the adjusted speed and fade time.
• For switching between the parameters when editing movement patterns.
15. Display
Rear panel:
16. DMX512 output
3-pin XLR jack for connecting the DMX input of the first light effect unit.
17. Power input
©Copyright Lotronic 2018 Manual DMX512-PRO 4