Publicité
Les langues disponibles
Les langues disponibles
GB – USER MANUAL
DMX512-PRO
SAFETY RECOMMENDATIONS
* Please keep this User Guide for future consultation. If you sell the unit to another
user, be sure that they also receive this instruction booklet.
* Always make sure that you are connecting to the proper voltage and that the line
voltage you are connecting to is not higher than that stated on decal or rear panel of
the fixture.
* This product is intended for indoor use only!
* To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure
there are no flammable materials close to the unit while operating.
* The unit must be installed in a location with adequate ventilation, at least 50cm
from adjacent surfaces. Be sure that no ventilation slots are blocked.
* Always disconnect from power source before maintenance, repairs or fuse
replacement.
* In the event of serious operating problem, stop using the unit immediately. Never
try to repair the unit by yourself. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center. Always use the same type spare parts.
* Don't connect the device to a dimmer pack.
* Make sure power cord is never crimped or damaged.
* Never disconnect power cord by pulling or tugging on the cord.
* Operate this device only under ambient temperature conditions of -5°C to +45°C.
* There are no serviceable parts inside the device. Maintenance and service
operations are only to be carried out by authorized dealers.
* Should you need any spare parts, please use genuine parts. Should you have further
questions, please contact your dealer.
* We recommend a frequent cleaning of the device. Please use a soft lint-free and
moistened cloth. Never use alcohol or solvents!
DESCRIPTION
The DMX controller serves for operation of DMX-controlled light effect devices such
as LED spot lights, moving heads and scanners in discotheques or on stage. The
controller provides 512 control channels which can be assigned as desired to the 32
control channels. The built-in effect generator facilitates programming significantly. 9
movement patterns designed for moving heads and scanners can be called at the
push of a button as well as 7 color effects designed for light effect devices with
RGBW LEDs in particular. 32 memory banks are available for programming
illumination scenes. 32 additional memory banks are available for programming
chases (sequences of scenes) with 100 steps each. The chases may be played
©Copyright Lotronic 2018
Manual DMX512-PRO
2
Publicité
