Publicité
Les langues disponibles
Les langues disponibles
6. Press the button ENTER to memorize your setting.
• To confirm the memory procedure, all LEDs of the controller flash three times.
7. Repeat the steps 3, 5 and 6 to configure further units.
8. After your settings, exit the system settings.
For this, keep the button MENU pressed for 2 seconds.
Copying Device Settings
All DMX values assigned to a light effect unit can be conveniently copied to another
unit. The adjustment can be made in the system settings.
1. Keep the button MENU pressed for 2 seconds to call the system settings.
2. The display indicates the first menu item „01.Patch fixture" (otherwise select it
with the pan wheel). Press the button ENTER to begin with the configuration. The
display indicates "PLEASE SELECT FIXTURE".
3. Keep the number button pressed of the unit to be copied.
4. In addition, press the number button you would like to copy the values to. The
display shortly indicates "COPY".
Fig. 6.5 Copying device settings
FX:01 COPY FX:02
OPERATION
Switch on the controller with the rear power switch. The unit is in manual mode and
the display indicates "Manual" in the upper line.
Manual Adjustment of an Illumination Scene
An illumination scene contains the values of all control channels including the pan
and tilt settings of the connected light effect units.
1. Press the button FIXTURE.
• The control LED lights.
2. Use the number buttons 1-16 to select the units to be controlled.
• The corresponding LEDs of the buttons light.
• If a number button is pressed once again, the corresponding device is deselected.
• Instead of selecting each device individually, devices with consecutive numbers can
be selected simultaneously. For this, press the first and last number button
simultaneously.
Example: For selecting the devices 1 to 8, press the number buttons 1 and 8
simultaneously. Thus, all 8 devices will be selected simultaneously. In the same way, it
is possible to deselect devices again.
Manual
Fig. 7.1 Adjusting DMX values
CH:02 Val:098
©Copyright Lotronic 2018
Manual DMX512-PRO
10
Publicité
