afx light DMX512-PRO Manuel D'utilisation page 21

for each memory bank. You should not make any changes to the default folder.
Otherwise the controller cannot the reload the data later.
5. After completing the data backup, the device returns to the main menu level.
Regarding USB memory devices
• This unit supports data carriers with the file system FAT32 and with a capacity up to
32 GB.
• Prior to connecting a USB memory device, call the system settings.
• If a data carrier is not recognized at the first try, turn the controller off and on
again.
Data load [Data import]
1. Connect a USB memory device to the controller's USB port.
• The files to be imported must be stored in the folder "DMX Move Control
512"located on the root directory of the USB memory device.
2. Call the menu item with the pan wheel and confirm with ENTER.
• The display indicates "Press number key Select file" (select file with number button).
• The control LED of a number button lights, when data is available on the USB
memory device for this memory bank.
3. Select the file to be loaded with the number buttons 1-16.
• The display indicates a progress bar.
4. After successful completion of the data import, the device returns to the main
menu level.
Black-out mode [Blackout function]
It is possible to define whether all control channels react on the button BLACK OUT
or only the dimmer control channel.
1. Call the menu item with the pan wheel and confirm with ENTER.
2. Use the pan wheel to choose between the settings [All channels] and [Only
dimmer].
• All channels: All control channels react on the button (i.e. in the blackout state the
control channels have the value zero).
• Only dimmer: Only the dimmer control channel reacts on the button BLACK OUT
(i.e. in the blackout state the control channel has the value zero).
3. Confirm your setting with ENTER.
• The display shortly indicates "SAVE OK" and returns to the main menu level.
©Copyright Lotronic 2018 Manual DMX512-PRO 21