babymoov Trotteur Jump'n Go Notice D'utilisation page 7

9. Jumper mode
To activate the « jumper » mode, turn the knob 90° to « jump » position.
Do not employ the « jumper » mode when using as a "push along"; your child could lose balance and fall.
10. Push mode
Tip the back of the seat forward, first making sure that you have removed the snap fasteners placed under the
seat (a). Then pull the handle and push the seat forward (b).
Finally, push the back of the frame forward (c). In this manner, the product can be used to teach your infant to walk.
WARNING
• Never leave child unattended; he/she can move and
reach for objects more easily and quickly when in
the walker.
• In compliance with EN 1273 (August 2005) safety norms.
• Although the materials used to manufacture this
product are in accordance with the AZO, EN71-2 and
EN71-3 safety norms required for colour fast clothing,
we do not recommend long exposure of the walker to
direct sunlight. Scratches, fading or loss of colour due
to exposure to strong sunlight do not justify a claim. The
covers can be washed by hand or in the washing
machine at low temperature (detergent for fragiles).
WARNING
When in the walker, the child will be able to reach further
and move faster than before:
- Block access to stairs, steps and uneven surfaces.
- Guard all fires, heating and cooking appliances.
- Keep hot drinks, electrical flexes and all other potential
hazards out of the child's way.
- Since there is an increased risk of bumping into
glass door, window or furniture surfaces, take the
necessary precautions.
• Do not use the walker if any of the parts are broken
or missing.
• Only use the baby walker for short periods of time
(20 minutes).
CAUTION
3 IN 1 JUMP'N GO BABY WALKER • Instruction Manual
• In « walker » mode, the walker is intended for use by
children who are able to sit up unassisted, from roughly
6 months' of age. It has not been designed for toddlers
who can already walk or for those weighing over 12 kg.
• Only use replacement spare parts approved by
Babymoov or an official distributor.
• Block access to stairs, steps, etc. to avoid serious injury
or death.
• Always keep child in view while in walker.
• Lubrication or adjustment of parts is not necessary.
Check regularly that all fastenings and components are
secure and working properly. All parts of the walker can
be wiped with a damp cloth and mild detergent. Dry
all metal parts to prevent rust.
• Never adjust the walker whilst your child is still in it.
• Prevent bumping into glass door, window or
furniture surfaces.
• The frames of all our models have been tested and
proven in compliance with EN 1273 norms.
• Regular maintenance contributes greatly to the safety
and prolongs the life of your walker.
• We recommend regular upkeep of painted parts. If
badly damaged, clean painted surface immediately.
• If you follow the above instructions you will have many
years of pleasure from your 3 in 1 Jump'n Go walker.
• Waste Electrical and Electronic Equipment should be
disposed of by selective collection. Do not throw
electrical and electronic equipment away with un-
sorted household waste, but dispose of it at a selective
collection point.
WARNING
• Do not recharge nonrechargeable batteries.
• Remove rechargeable batteries from the bouncer
housings before charging them.
• Do not mix different brands of batteries (rechargeable
or non-rechargeable) or new and used batteries.
• Only charge rechargeable batteries under adult supervision.
• Insert batteries the correct way round, according to
the + / - symbols.
• Remove used batteries from the housings.
• Do not cause a short between the terminals.
7