Safety Considerations; Technical Data - Dustcontrol DC 380 Manuel D'instruction

Safety Considerations

Read all instructions before attempting to operate this
machine and save these instructions.
Warning! When using electric machines, basic safety
precuations should always be
the risk of fi re, electric shock and personal injury,
including the following:
1. Work area environment
Don´t expose the machine for rain. Don´t use
it in damp or wet locations or in presence of
fl ammable liquids or gases.
2. Overload
Never let the machine operate fully throttled.
Always follow the regulations pertinent to the
material you are working with ie asbestos.
Don´t use the machine for purposes that it isn´t
intended for.
3. Don´t abuse cord
Never pull the machine by cord. Keep cord
from heat and sharp edges. Check the electric
cable regularly if damage.

TECHNICAL DATA

HxWxL
Weight
Outlet
Flow, at open outlet
Power consumption
Degree of separation,
microfi lter (DOP)
Soundlevel*/:
Speed 1
Speed 2
*/ Sound level at 1,6 m height and 1 m distance according
to DIN 45635 Section 1 (4/84) in free space and at maximum
airfl ow.
followed to reduce
415x375x560 mm
17 kg
φ 125 mm
380 m 3 /h
180 W, 220 V
>99.97 %
45 dB(A)
64 dB(A)
DC 380 - 8
4. Important measure
With cleaning and maintenance on the mach-
ine, the power cable should be disconnected
from the supply.
5. Maintain the machine with care
Keep machine clean and check that the hose
is entired and that all gaskets are tight. Follow
instructions. Keep handles dry and free from
oil and grease.
6. Checking of damage
Before futher use of the machine it should be
carefully checked that the machine is un-
damaged. If there are any damaged parts these
should be repaired by of a Dustcontrol authori-
zed service center.
7. Warning
Use only accessories and replacable parts
which are available in Dustcontrol catalogue.
When using faulty parts or pirate parts
(especially fi lter) the machine could leak out
unhealthy dust which can cause personal
injuries.
Art nr 9017