Safety Considerations; Technical Data - Dustcontrol DC AirCube X2 Notice Originale

Safety Considerations

Read all instructions before attempting to operate this
machine and save these instructions.
Warning! When using electric machines, basic safety
precuations should always be
risk of fi re, electric shock and personal injury, including the
following:
1. Work area environment
Don´t expose the machine for rain. Don´t use it in
damp or wet locations or in presence of fl ammable
liquids or gases.
2. Overload
Never let the machine operate fully throttled. Always
follow the regulations pertinent to the
material you are working with ie asbestos. Don´t use
the machine for purposes that it isn´t
intended for.
3. Don´t abuse cord
Never pull the machine by cord. Keep cord from
heat and sharp edges. Check the electric cable regu-
larly if damage.
4. Important measure
With cleaning and maintenance on the machine, the
power cable should be disconnected from the supply.

TECHNICAL DATA

HxWxL
Weight
Outlet
Hose length (extra accessories)
Flow, at open outlet
Neg pressure
Power consumption
Degree of separation, microfi lter
DOP
EN 1822-1
Soundlevel*/:
Speed 1
Speed 2
*/ Sound level at 1,6 m height and 1 m distance according
to DIN 45635 Section 1 (4/84) in free space and at maximum
airfl ow.
followed to reduce the
850x485x365 mm
30 kg
2 x φ 125 mm
5-10 m (φ 125)
800 m 3 /h
max 400 Pa
240 V, 340 W
> 99.97 %
HEPA 13
50 dB(A)
70 dB(A)
DC AirCube X2 - 8
5. Maintain the machine with care
Keep machine clean and check that the hose (extra
accessories) is entired and that all gaskets are tight.
Follow instructions. Keep handles dry and free from
oil and grease.
6. Checking of damage
Before futher use of the machine it should be ca-
refully checked that the machine is un damaged. If
there are any damaged parts these should be repaired
by of a Dustcontrol authorized service center.
7. Warning
Use only accessories and replacable parts which are
available in Dustcontrol catalogue.
When using faulty parts or pirate parts
(especially fi lter) the machine could leak out
unhealthy dust which can cause personal
injuries.
Part No 9462