Switching The Ac 3200-Ii On And Off; Recommendations And Tips For Optimum Transmission - Sennheiser AC 32000-II Notice D'emploi

Recommendations and tips for optimum transmission

Switching the AC 3200-II on and off

Press the on/off switch
The AC 3200-II switches on and the LED
red.
Press the on/off switch
The AC 3200-II switches off and the LED
After switch-off, the AC 3200-II is in standby mode. To disconnect the device
and the NT 12-125D mains unit from the mains power supply, pull out the
mains connector from the wall socket.
RF indicators
The AC 3200-II has 8 control LEDs
transmission power is available.
Recommendations and tips for optimum
transmission
• There should be a "free line of sight" between transmitting and receiving
antennas.
• To avoid overloading the receiver, observe a minimum distance of 5 m between
transmitting and receiving antennas.
• Observe a minimum distance of 50 cm between the transmitting antenna and
metal objects (such as cross members or reinforced-concrete walls).
• When using a multi-channel system:
Set all transmitters of your multi-channel system to intermodulation-free
frequencies.
5.
4
5
again.
4
3
which light up green on the channels where
lights up
goes off.
AC 3200-II | 11