Télécharger Imprimer la page

EHEIM powerLED+ Mode D'emploi page 12

Masquer les pouces Voir aussi pour powerLED+:

Publicité

English
Before use, carry out a visual
inspection to ensure that the appli-
ance, especially the mains cable
and plug, are undamaged.
Do not look directly into the light
source for a prolonged period; this
may result in eye damage.
The appliance cannot be opened.
A defective appliance must be
completely replaced.
Only use original spare parts and
accessories for the appliance.
In the event of water leakage or
when the residual current protec-
tion device is triggered, immedi-
ately disconnect all devices in the
aquarium from the power supply.
If they are not being used, always
disconnect all devices in the
aquarium from the power supply
before you install/remove any
parts and before all cleaning and
maintenance work.
Protect the mains socket and
mains plug against moisture. It is
recommended to form a drip loop
with the mains cable to prevent
any water running along the cable
to the mains socket.
The electrical data of the appli-
ance must match the data of the
power mains. This data is found
on the type plate, the packaging
and in these instructions.
12

Publicité

loading